Tp-link Wireless WI-FI Router N300Mbps
Tplink Wireless WI-FI Routers 300mbps
Configure
Model : TL- WR841N
Router Mode
If your internet comes from an Ethernet outlet
Connect the routers WAN Port to it then skip
Steps 1,2,3
Access Point Mode..
Wired Router> internet.
Router > WAN
Device
Power On The Router.
Connect the routers WAN Port to yoir wired routers Ethernet port via
an Ethernet Cable as shown above.
Connect a Computer to the router via an Ethernet Cabal or wirelessly by Using the SSID ( Network Name) and Wireless Password) printed on Label at bottom of the routers.
Used the first open router Default Network Name SSID and Network to join the routers back site... Password.. Pin and QR Code
You are using mobile phone.
Web Browser and Enter. http://tplinkwifi.net
in the address bar Create a password to login
Click Next to Start the Quickly Setup to Setup the internet connection.
Range Extender Mode:
Configuration
Place the router next to your Host router and power it on.
Open on... Click Next to start the Quick Setup Select Range Extender and follow the steps instructions to set up the internet connection.
Solid on:. At Least one LAN port is connected
Internet Router display. WiFi / LED lights (Green) Bilinking
WPS - connection is in progress This mayTake up to 1minutes.
You are using mobile phone.
Web Browser and Enter. http://tplinkwifi.net
in the address bar Create a password to login
Click Next to Start the Quickly Setup to Setup the internet connection.
Range Extender Mode:
Configuration
Place the router next to your Host router and power it on.
Open on... Click Next to start the Quick Setup Select Range Extender and follow the steps instructions to set up the internet connection.
Solid on:. At Least one LAN port is connected
Internet Router display. WiFi / LED lights (Green) Bilinking
WPS - connection is in progress This mayTake up to 1minutes.
No comments