Rules for Making New Coils for Ceiling Fans

Rules for Making New Coils for Ceiling Fans

If you want to learn how to do it follow here your following steps to build a new ceiling fan coil harness.

First open the damaged ceiling fan, then place a width chart on the area where the fan will be attached.  This will be for the focal point of the fan.

Move towards the center of the ceiling as a focal point and draw a line on the wall.  This line will be above the center point.

Now, make an included circle if possible on the plane of the ceiling above the line.  The circle will be above the line and coincide with the center point.  This will be the base of the fan.

The coils included in the fan alternately open a line at a suitable distance.  Check the number and phase of the coils in the fan design.

On new coil mounting design of ceiling fans.  Some common coil tie construction steps may be as follows:

And determine the number of coils depending on the design of the fan.  For example, a typical fan may use four coils.

Mark the center of a circle above the center of the fan.  This will be the main point for tying the coil.

For all coils connected from the center of the fan, open the field at equal distances from the center to each other.  This will determine a specific path on each coil.

Separate the paths of each coil and cut them to the appropriate length.  This length can be greater than different coil radii of the fan.

Connect each coil to the center point of the fan.  This will be the round top of the coil.

Place the coils in a shape around the center of the fan.  This will be the top of the fan coil mount.

Connect the tops of the fan coils and ensure their good connection.  It can get out of the way of the coils respectively.

Make sure the coils are vertically aligned with the ceiling and ensure their connection.

Ensure parallel deviation of fan coils.  It will be fixed flush with the ceiling.

Make sure the fan coils are well connected and perform regular maintenance.

Check the fan to make sure the coils are working properly and the new harness is properly fixed.

Following these steps will complete the installation of the new fan coil.

However, note that detailed construction steps may vary according to fan model and manufacturer's instructions.  Finally, seek professional help from the local power company or professional.