Tplink 300Mbps Wireless N Wall Plate Access Point 

To set up your TP-Link 300Mbps Wireless N Wall Plate Access Point.

First follow these steps:

Then mount the access point: Choose a suitable location where you want to install the access point to be connected

And make sure it's close to a power outlet and offers the best coverage for your wireless network

Power connection: Connect the access point to a power outlet using the provided power adapter and network connection Use an Ethernet cable to connect the access point to your existing network router.

Or plug one end of the switch Ethernet cable into the LAN port of the access point and the other end into the LAN port of your router or switch.

Configure the access point: Connect your computer or mobile device to the Wi-Fi network to set the default access point (usually named something like "TP-Link_XXXXXX"). Open a web browser and enter the access point's default IP address in the address bar (usually 192.168  .like 0.1).

And log in using the default username and password (see the user manual for details. Follow the on-screen instructions to set up your wireless network settings.

Be sure to save your settings, such as SSID (network name), password, encryption method, etc., before exiting.

Finalize the configuration:

When configuration is complete, disconnect from the access point's default Wi-Fi network and connect to your newly configured wireless network using the SSID and password you set up.

Testing: Test the wireless connection to ensure that your devices can connect to the network and access the Internet without any problems

Your Problem Optional Settings: You may want to explore and configure additional settings such as guest network, advanced security features, etc. depending on your Specific requirements.

That's it!  Your TP-Link 300Mbps Wireless N Wall Plate Access Point should now be set up and ready to use.