How to Install Beninca RI 6E Manual Wiring

Gate Motor Install Beninca RI 6E Manual Wiring

provide the wiring details for your Beninca Automatic Sliding Gate RI 6E, here is a general guide.

For such specific instructions, always refer to the installation manual specific to your model. 

Here is an outline of the general steps involved: 
Safety PrecautioTons: Disconnect the power supply before starting any wiring.

Make sure that all connections comply with local electrical codes and regulations.

And power supply: Connect the main power supply to the appropriate terminals, usually marked L (Live), N (Neutral), and E (Earth/Ground).
After that motor connection: connect the motor cable to the designated terminal on the control board well.

It usually has three connections: motor open, motor close and common.

Limit switches: Connect the limit switches to the terminals marked for the Open  and closed positions.

These switches signal when the gate has reached its fully open or closed position

Photocells: Photocells are safety devices that detect obstacles in the path of the gate 

Connect the photocell transmitter and receiver to the appropriate terminals, often labeled as photocell TX (transmitter) and photocell RX (receiver).

And control devices: Connect any external control devices such as push buttons, remote controls or keypads to specific input terminals.

Safety Edges: If the gate is equipped with safety edges, connect them to the corresponding safety edge input terminals.

Loop Detector: For installations with a loop detector, wire the loop detector sensor to the input terminals specified for the loop detector.

Accessory Power Supply: If there are additional accessories such as lights or alarms, connect them to the auxiliary power supply terminals.

Grounding: Ensure that all metal parts of the installation are properly grounded to prevent electric shock.

Test after: After wiring, restore power and test the system to confirm everything.

Components are working properly  For a detailed wiring diagram, please refer to the installation manual for the Beninca RI 6E model or contact Beninca technical support or a technician.