Lecxo Access Control Keypad ACK1001 How To Install Wiring Details

Lecxo Access Control Keypad ACK1001 How To Install Wiring Details

Read details on how to set up.
There is a simple access control keypad such as the Lecxo ACK1001.

First tools and materials needed: Screwdriver set Wire stripper/cutter Multimeter (optional for test connection) Power supply (12V DC) Control panel (if applicable) Electric door lock See instructions.

Power supply connection: Red wire: Connect to the positive terminal (+12V) of the power supply.  Black wire: Connect to the negative terminal (ground) of the power supply.

Door Lock Connection: No (Normally Open) Wire:  Connect to the positive terminal of the electric door lock.  COM (Common) wire: Connect to the negative terminal of the electric door lock.  exit button connection (if

As applicable): NO (Normally Open) Terminal: Connect to one terminal of the Exit button.COM (Common) Terminal: Connect to the other terminal of the Exit button.

And Wiegand data wire (for connection to a control panel): Green wire: Wiegand data 0 (D0) White wire: Wiegand data 1 (D1)

Ground Wire : Connect to the ground terminal of the control panel. Alarm output (if applicable): No (normally open) Wire: Connect to alarm system input.

After that COM (Common) Wire: Connect to common ground of alarm system. Note: Double check the voltage and polarity to prevent damage to the device.

Refer to the specific product manual for specific wire color codes and functions, as they may vary slightly.  If you have the product manual, take a good look and know that it provides specific details and diagrams. Lecxo ACK1001 model.